View PT035TN01-V2_3108288.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x the copyright belongs to innolux. any unauthorized use is prohibited. innolux copyright 2004 all rights reserved, copying forbidden. record of revision version revise date page content 1 2005/10/12 initial release http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x the copyright belongs to innolux. any unauthorized use is prohibited. contents: 1. general sp ecificat ions ...................................................................................................... ...... 1 2. pin a ssignment .............................................................................................................. ......... 2 3. operation s pecifications .................................................................................................... ..... 5 3.1. absolute ma ximum ra ting ................................................................................................ 5 3.2. electrical characteri stics ................................................................................................ ... 6 3.2.1. typical oper ation condi tions .................................................................................... 6 3.2.2. current consumpt ion ................................................................................................ 7 3.2.3. backlight dr iving condi tion ....................................................................................... 7 3.3. timing char acteristics .................................................................................................... ... 8 3.3.1. timing conditi ons...................................................................................................... 8 3.3.2. timing diagram ....................................................................................................... 10 4. optical sp ecificat ions...................................................................................................... ...... 12 5. reliability test items ...................................................................................................... ....... 16 6. handling precaut ions........................................................................................................ .... 17 6.1. safety .................................................................................................................... .......... 17 6.2. h andling .................................................................................................................. ........ 17 6.3. static electric ity ........................................................................................................ ....... 17 6.4. st orage................................................................................................................... ......... 17 6.5. cle aning .................................................................................................................. ........ 17 7. mechanica l dra wing .......................................................................................................... ... 18 8. package drawing............................................................................................................. ..... 19 http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 1/19 the copyright belongs to innolux. any unauthorized use is prohibited. 1. general specifications no. item specification remark 1 lcd size 3.5? inch 2 driver element a-si tft active matrix 3 resolution 320x3(rgb)x240 4 display mode normally white, transmissive with micro reflective 5 dot pitch 0.073(w)x0.219(h) mm 6 active area 70.08(w)x52.56(h) mm 7 module size 78.2(w)x65.0(h)x3.5(d) mm note 1 8 surface treatment anti glare 9 color arrangement rgb-stripe 10 interface digital 11 backlight power consumption 0.44w(typ.) 12 panel power consumption tbd 13 weight tbd note 1: refer to mechanical drawing. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 2/19 the copyright belongs to innolux. any unauthorized use is prohibited. 2. pin assignment pin no. symbol i/o function remark 1 gled p gnd for led 2 gled p gnd for led 3 vled p power for led 4 vled p power for led 5 gnd p ground 6 nc i no connect 7 nc i no connect 8 nc i no connect 9 nc i no connect 10 gnd p ground 11 nc - no connect 12 nc - no connect 13 pol i polarity select for the line inversion control signal. 14 reset i reset 15 spena i serial port data enable signal. normally pull high. 16 spck i serial port clock .normally pull high. 17 spda i/o serial port data input/output. 18 d00 i blue data(lsb) 19 d01 i blue data 20 d02 i blue data 21 d03 i blue data 22 d04 i blue data 23 d05 i blue data http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 3/19 the copyright belongs to innolux. any unauthorized use is prohibited. 24 d06 i blue data 25 d07 i blue data(msb) 26 d08 i green data(lsb) 27 d09 i green data 28 d10 i green data 29 d11 i green data 30 d12 i green data 31 d13 i green data 32 d14 i green data 33 d15 i green data(msb) 34 d16 i red data(lsb) 35 d17 i red data 36 d18 i red data 37 d19 i red data 38 d20 i red data 39 d21 i red data 40 d22 i red data 41 d23 i red data(msb) 42 ihs i horizontal synchronous signal 43 ivs i vertical synchronous signal 44 clk i data clock 45 av dd p analog power supply(+5v) 46 av dd p analog power supply(+5v) 47 v cc p digital power supply(+3.3v) 48 v cc p digital power supply(+3.3v) 49 nc - no connect 50 v gl i negative power for scan driver http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 4/19 the copyright belongs to innolux. any unauthorized use is prohibited. 51 v gl i negative power for scan driver 52 nc - no connect 53 v gh i positive power for scan driver 54 nc - no connect 55 nc - no connect 56 v com i v com input 57 v com i v com input 58 den i data enabling signal 59 gnd p ground 60 gnd p ground http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 5/19 the copyright belongs to innolux. any unauthorized use is prohibited. 3. operation specifications 3.1. absolute maximum rating (gnd =0v, note 1) values item symbol min. max. unit remark v cc -0.3 7 v av dd -0.3 7 v v gh -0.3 18 v v gl -15 0.3 v power voltage v gh -v gl - 33 v operation temperature t op -20 70 storage temperature t st -30 80 note 1: device is subject to be dam aged permanently if stresses beyond those absolute maximum ratings listed above. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 6/19 the copyright belongs to innolux. any unauthorized use is prohibited. 3.2. electrical characteristics 3.2.1. typical operation conditions (gnd =0v, note 3) values item symbol min. typ. max. unit remark v cc 3.0 3.3 3.6 v av dd - 5.0 - v v gh - tbd - v power voltage v gl - tbd - v v cac - tbd - v note 1 v com v cdc - tbd - v note 2 dc component input logic high voltage v ih 0.7v cc - v cc v input logic low voltage v il 0 - 0.3v cc v note 1: the brightness of lcd panel could be changed by adjusting the ac component of v com . note 2: the voltage of v cdc must be adjustable from 0v to 3v. note 3: be sure to apply gnd, v cc , and v gl , to the lcd first, and then apply v gh . http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 7/19 the copyright belongs to innolux. any unauthorized use is prohibited. 3.2.2. current consumption (gnd =0v) values item symbol min. typ. max. unit remark i gh - tbd - ma v gh =tbd i gl - tbd - ma v gl = tbd i cc - tbd - ma v cc =3.3v current for driver i dd - tbd - ma av dd =5v 3.2.3. backlight driving condition values item symbol min. typ. max. unit remark led voltage v l - (21.6) - v note 1 led current i l - (20) - ma note 1 led life time - 10,000 - - hr note 2 note 1: the led driving condition is defined for each led module. (see the figure) vled d2 led d6 led d1 led d3 led gled d4 led d5 led note 2: the ?led life time? is defined as t he module brightness decrease to 50% original brightness that the ambi ent temperature is 25 and i l =20ma. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 8/19 the copyright belongs to innolux. any unauthorized use is prohibited. 3.3. timing characteristics 3.3.1. timing conditions digital parallel rgb interface values item symbol min. typ. max. unit. remark clk period t osc - 156 - ns data setup time t su 12 - - ns data hold time t hd 12 - - ns ihs period t h - 408 - t osc ihs pulse width t hs 5 30 - t osc ivs pulse width t vs 1 3 5 t h ntsc 18 ivs-den time pal t vse - 26 - t h ihs-den time t he 36 68 88 t osc den pulse width t ep - 320 - t osc hardware reset timing values item symbol min. typ. max. unit. remark reset low pulse width t rsb 10 - - s http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 9/19 the copyright belongs to innolux. any unauthorized use is prohibited. spi timing characteristics values item symbol min. typ. max. unit remark spck period t ck 60 - - ns spck high width t ckh 30 - - ns spck low width t ckl 30 - - ns data setup time t su1 12 - - ns data hold time t hd1 12 - - ns spena to spck setup time t cs 20 - - ns spena to spda hold time t ce 20 - - ns spena high pulse width t cd 50 - - ns spda output latency t cr - 1/2 - t ck http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 10/19 the copyright belongs to innolux. any unauthorized use is prohibited. 3.3.2. timing diagram digital parallel rgb clk t su t hd r4 r0 r1 r2 r3 d0x(r) t osc den blanking data g4 g0 g1 g2 g3 d1x(g) blanking data b4 b0 b1 b2 b3 d2x(b) blanking data ihs and horizontal control timing waveform t hs ihs ~ ~ den ~ ~ t he pol ~ ~ t h ihs and vertical control timing waveform ihs ivs t vs ~ ~ den t ep t vse pol http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 11/19 the copyright belongs to innolux. any unauthorized use is prohibited. spi ?read? timing 1 a3 a1 a0 d7 d6d5d4d3d2d1d0 spda spck spena t cr t cs t ce t cd t ckh t ckl t ck t su1 t hd1 a2 spi ?write? timing 0 a3 a1a0d7d6d5d4d3d2d1 d0 spda spck spena t cs t ce t cd t ckh t ckl t ck t su1 t hd1 a2 http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 12/19 the copyright belongs to innolux. any unauthorized use is prohibited. 4. optical specifications item symbol condition min. typ. max. unit remark l =180(9 o?clock) 55 65 - r =0(3 o?clock) 55 65 - t =90(12 o?clock) 35 45 - viewing angle (cr 10) b =270(6 o?clock) 55 65 - degree note 1 t on - 15 30 msec note 3 response time t off - 20 50 msec note 3 contrast ratio cr 200 300 - - note 4 w x - tbd - - color chromaticity w y - tbd - - note 5 note 6 luminance l 200 250 - cd/m2 note 6 luminance uniformity y u normal = =0 70 75 - % note 7 test conditions: 1. v cc =3.3v, av dd =5.0v, i l =20ma (backlight current), t he ambient temperature is 25 . : 2. the test systems refer to note 2. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 13/19 the copyright belongs to innolux. any unauthorized use is prohibited. note 1: definition of viewing angle range fig. 5-1 definition of viewing angle note 2: definition of optical measurement system. the optical characteri stics should be measured in dark room. the optical properties are measured at the center poi nt of the lcd screen. (response time is measured by photo detector topcon bm-7, other items are measured by bm-5a/field of view: 1 /height: 500mm.) fig. 5-2 optical measurement system setup normal line = =0 normal line = =0 photo detector =90 12 o?clock direction =270 6 o?clock direction =0 =180 active area 500mm lcd panel =90 12 o?clock direction =270 6 o?clock direction =0 =180 active area l t b r http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 14/19 the copyright belongs to innolux. any unauthorized use is prohibited. note 3: definition of response time the response time is defined as the lcd optical switching time interval between ?white? state and ?black? state. rise time (t on ) is the time between photo detector output intensity changed from 90% to 10%. and fall time (t off ) is the time between photo detector output intensity changed from 10% to 90%. fig. 5-3 definition of response time note 4: definition of contrast ratio state black"" the on is lcd when measured luminance state white"" the on is lcd when measured luminance =(cr) ratio contrast note 5: definition of color chromaticity (cie1931) color coordinates measured at center point of lcd. note 6: all input terminals lcd panel must be ground when measuri ng the center area of the panel. 100% 90% 10% 0% photo detector output (relative value) t on t off white (tft off) black (tft on) white (tft off) http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 15/19 the copyright belongs to innolux. any unauthorized use is prohibited. note 7: definition of luminance uniformity to test for uniformity, the tested area, which is inside the active area, is divided into 3 rows and 3 colu mns. the measurement spot is placed at the center of each box. max min b b (yu) uniformity luminance = l-------active area length w----- active area width fig. 5-4 definition of uniformity b max : the measured maximum luminance of all measurement position. b min : the measured minimum luminance of all measurement position. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 16/19 the copyright belongs to innolux. any unauthorized use is prohibited. 5. reliability test items item test conditions remark high temperature storage ta = 80 240 hrs note 1 low temperature storage ta = -30 240hrs note 1 high temperature operation ts = 70 240hrs note 2 low temperature operation ta = -20 240hrs note 1 operate at high temperature and humidity +40 , 90%rh max. 240 hrs thermal shock -30 /30 min ~ + 80 /30 min for a total 100 cycles, start with cold temperature and end with high temperature vibration test frequency range:10~55hz stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direction of x. y. z. (6 hours for total) mechanical shock 100g 6ms,x, y, z 3 times for each direction package vibration test random vibration : 0.015g*g/hz from 5-200hz, -6db/octave from 200-500hz 2 hours for each direction of x. y. z. (6 hours for total) package drop test height:60 cm 1 corner, 3 edges, 6 surfaces electro static discharge 2kv, human body mode, 100pf/1500 ? note 1: ta is the ambient temperature of samples. note 2: ts is the temperature of panel?s surface. note 3: in the standard condition, there shall be no practical problem that may affect the display function. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 17/19 the copyright belongs to innolux. any unauthorized use is prohibited. 6. handling precautions 6.1. safety liquid crystal is poisonous. do not put it in your mouth. if liquid crystal touches your skin or clothes, wash it off immediately by using soap and water. 6.2. handling 1. the lcd panel is plate glass. do not subject the panel to mechanical shock or to excessive force on its surface. 2. the polarizer attached to the display is easily damaged. please handle it carefully to avoid scratch or other damages. 3. to avoid contamination on the display surface, do not touch the module surface with bare hands. 4. keep a space so that the lcd p anels do not touch other components. 5. put cover board such as acrylic board on the surface of lcd panel to protect panel from damages. 6. transparent electrodes may be disc onnected if you use the lcd panel under environmental conditions where the condensation of dew occurs. 7. do not leave module in direct sunlight to avoid malfunction of the ics. 6.3. static electricity 1. be sure to ground module before tu rning on power or operating module. 2. do not apply voltage which exceeds the absolute maximum rating value. 6.4. storage 1. store the module in a dark r oom where must keep at +2510 and 65%rh or less. 2. do not store the module in surr oundings containing organic solvent or corrosive gas. 3. store the module in an anti- electrostatic container or bag. 6.5. cleaning 1. do not wipe the polarizer with dry cloth. it might cause scratch. 2. only use a soft sloth with ipa to wipe the polarizer, other chemicals might permanent damage to the polarizer. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 18/19 the copyright belongs to innolux. any unauthorized use is prohibited. 7. mechanical drawing http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: p035-01-tt-21 page: 19/19 the copyright belongs to innolux. any unauthorized use is prohibited. 8. package drawing tbd http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
http://www.bdtic.com/innolux http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of PT035TN01-V2

	To Download PT035TN01-V2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .